Epoch 24-ft 5-Blades 52 RPM HVLS Fan with Epoch 2.0 Motor and Controller - 140 Nm/ 1.1 kW/ 1.5 hp

(No reviews yet) Write a Review

$3,801.00

SKU:

EP24F5B-2.0

Product Overview

Epoch 24-ft(7.3m) 5-Blades HVLS Fan with Epoch 2.0 Motor and Controller Platform

This is a 52 RPM 1.1 kW (1.5 hp) HVLS fan with 24-ft blades. It can move a ton of air. It has 5-blades.

Technical Specifications >

Installation Guide >

OEM Drawings >

Product Specifications

Parameter	Specifications
Fan Diameter	24-ft
No. of Blades	5
Blade Profile	Airfoil Design
Blade Material	Anodized 6061-T6 Aluminum
Blade Struts	Clear Zinc/High Tensile Steel
Blade Width	187 mm
Blade Thickness	2mm
Blade End Winglets	Nylon
Coverage Radius in Feet	55
Space between Fans in Feet	110
Minimum Space from Wall in Feet	36
Technology	UPF (Unity Power Factor Correction) & PMSM (Permanent Magnet Synchronous Motor)
Motor	Epoch 2.0 Platform by Falco/Direct Drive PMSM Motor
Max Speed (RPM)	52
Power Usage at Max RPM	1,100W (1.5 hp)
Torque at Max RPM	90Nm
Standard Power	200 to 277V AC, Single Phase, 50 or 60 Hz
Coverage	25,000 Sq. Ft. (2,323 Sq. m)
Air Flow (Cubic Ft/Min)	450,000 to 500,000
Approximate Fan Weight (kgs/lbs.)	88 kg /194 lbs.
Sound	< 35 dB
Operating Units - Available Options	Wireless - Smart Phone Apps, Touch Screen LCD (Modbus), Analog Controls, Analog Controls with LCD
Safety	Safety Guy Wire for motor and for each blade, Designed with UL507 safety system for fans, UL1004 safety system for motors, Automotie grade hub and guy wires
Warranty	See Warranty Information here.

Product Description

Epoch HVLS Fans - with PMSM Motor & direct drive meets International standards for Quality, Safety and Performance.

Airfoil and Blade Design

Blade design combines modern day Aeronautics and wing structure of a Falcon to create a remarkably dynamic and efficient air flow at every speed.

The blades use modern day Aeronautics principles to optimize air flow at every speed by dynamically and adequately adjusting the blade angles.

Blade Configurations:

Five Blade Configuration

Mounting Configuration:

The mounting hole pattern consists of a 76.2 mm square with four 3/8″ pem nuts at the four corners of the square. Two holes in the middle are meant for cable routing and are covered with a protective shroud.