6-ft(1.8m) 5-Blades HVLS Fan with Epoch 1.0 Motor and Controller Platform
This is a 230 RPM 1.1kW (1.5hp) HVLS fan with 6-ft blades. It can move a ton of air. It has 5-blades.
|No. of Blades||5|
|Blade Profile||Airfoil Design|
|Blade Material||Anodized 6061-T6 Aluminum|
|Blade Struts||Clear Zinc/High Tensile Steel|
|Blade Width||187 mm|
|Blade End Winglets||Nylon|
|Coverage Radius in Feet||28|
|Space between Fans in Feet||56|
|Minimum Space from Wall in Feet||12|
|Technology||UPF (Unity Power Factor Correction) & PMSM (Permanent Magnet Synchronous Motor)|
|Motor||Epoch 1.0 Platform by Falco/Direct Drive PMSM Motor|
|Max Speed (RPM)||230|
|Power Usage at Max RPM||750W (1 hp)|
|Torque at Max RPM||27Nm|
|Standard Power||200 to 264V AC, Single Phase, 50 or 60 Hz|
|Coverage||4000 Sq. Ft. (371 Sq. m)|
|Air Flow (Cubic Ft/Min)||350,000 to 400,000|
|Approximate Fan Weight (kgs/lbs.)||55 kg /121 lbs.|
|Sound||< 35 dB|
|Height from Floor in Meters||4 to 5|
|Operating Units - Available Options||Wireless - Smart Phone Apps, Touch Screen LCD (Modbus), Analog Controls, Analog Controls with LCD|
|Safety||Safety Guy Wire for motor and for each blade, Designed with UL507 safety system for fans, UL1004 safety system for motors, Automotie grade hub and guy wires|
|Warranty||2 Years (Extended Warranty Available)|
Airfoil and Blade Design Inspired by Nature:
Blade design combines modern day Aeronautics and wing structure of a Falcon to create a remarkably dynamic and efficient air flow at every speed.
The blades use modern day Aeronautics principles to optimize air flow at every speed by dynamically and adequately adjusting the blade angles.
Five Blade Configuration
Epoch HVLS Fan Installation
Mounting Hole Pattern to Mount to the Ceiling
The mounting hole pattern consists of a 76.2mm square with four 3/8″ pem nuts at the four corners of the square. Two holes in the middle are meant for cable routing and are covered with a protective shroud.
For more info, please send enquiries to info @ falcoemotors.com